 |
| उत्पत्ति के प्लेस: | यूएसए |
| ब्रांड नाम: | GE |
| प्रमाणन: | CO |
| मॉडल संख्या: | IS200TBAIH1C |
| न्यूनतम आदेश मात्रा: | 1 पीसी |
|---|---|
| मूल्य: | $1200 |
| पैकेजिंग विवरण: | 6.4" x 6.4" x 4.8" (16 सेमी x 16 सेमी x 12 सेमी) |
| प्रसव के समय: | 5-8 कार्य दिवस |
| भुगतान शर्तें: | टी/टी |
| आपूर्ति की क्षमता: | 10pcs |
| ब्रांड नाम: | GE | नमूना: | IS200TBAIH1C |
|---|---|---|---|
| स्थिति: | नया | सकल वजन/शिपिंग वजन: | 2.2 एलबीएस / 35.2 औंस / 1 किग्रा |
| पैकिंग आकार: | 6.4" x 6.4" x 4.8" (16 सेमी x 16 सेमी x 12 सेमी) | उत्पत्ति देश/मूल देश: | संयुक्त राज्य अमेरिका |
| समय सीमा: | स्टॉक में | शिपिंग बंदरगाह: | ज़ियामेन |
| भुगतान: | टी/टी | बिक्री मूल्य: | जाँच करना |
| रंग: | सामग्री पर निर्भर करता है | गारंटी: | 12 महीने |
| समय सीमा: | 5-8 कार्य दिवस | कूरियर पार्टनर्स: | डीएचएल, यूपीएस, टीएनटी, फेडेक्स और ईएमएस |
IS200TBAIH1C GE Analog Input Terminal Board A 24 V DC Power 12 Number Of Channels
Product Details:
| Brand Name | GE |
| Model | IS200TBAIH1C |
| Catalog | Mark VI |
| Origin | United States (USA) |
| Dimension | 16*16*12cm |
| Weight | 1kg |
| HS Code | 8537101190 |
| Payment | T/T |
| Sales Price | $1200 |
| Warranty | 12 months |
| Lead time | 3-5 work days |
Additional Information:
| N/M | N/M |
| GEI-100165 | GEDS Standard Message Format (GSM) |
| GFK-1396 | CIMPLICITY HMI CimEdit Operation Manual |
| GEH-6408 | Control System Toolbox for Configuring the Trend Recorder |
Description:
The GE IS200TBAIH1C is an Analog Input Terminal Board manufactured and designed by General Electric as part of the Mark VI Series used in gas turbine control systems. Two outputs and 10 analog inputs are supported by the Analog Input terminal board. Two-wire, three-wire, four-wire, or transmitters that are powered externally can all be plugged into one of the ten analog inputs. A current of 0-20 mA or 0-200 mA can be configured for the analog outputs. Surge and high frequency noise are protected from by noise suppression circuitry in the inputs and outputs.
All of the transducers have access to a 24 V dc power source on the terminal board. By employing jumpers, one can select between current and voltage inputs. One of the two analog output circuits can be configured through a jumper for 4-20 mA or 0-200 mA, while the other can be adjusted for either. TMR applications can both use the same terminal board.
The I/O controller queries each cable connector's unique ID device on the terminal board. The ID device is a read-only chip that has the JR, JS, and JT connector locations, along with the serial number, board type, and revision number of the terminal board. A hardware incompatibility fault is produced when this chip is read by the I/O controller and a mismatch is discovered.
व्यक्ति से संपर्क करें: Candy Wang
दूरभाष: +8618059279924
